Description
This vertical multistage centrifugal pump has suction and discharge ports on the same level. The pump head and base are made of cast iron, while all other wetted parts are constructed from stainless steel (EN 1.4301).
Specifications
| Manufacturer | Grundfos |
|---|---|
| Part Number | 96081984 |
| Rated pump speed | 3466 rpm |
| Rated flow | 9.69 US gpm |
| Rated head | 244.4 ft |
| Maximum head | 323.8 ft |
| Stages | 11 |
| Impellers | 11 |
| Number of reduced-diameter impellers | 0 |
| Low NPSH | N |
| Pump orientation | Vertical |
| Shaft seal arrangement | Single |
| Code for shaft seal | HQQE |
| Approvals | CE,CURUS |
| Approvals for drinking water | NSF/ANSI 61 |
| Curve tolerance | ISO9906:2012 3B |
| Pump version | A |
| Cooling | TEFC |
| Base | Cast iron, EN 1561 EN-GJL-200, ASTM A48-25B |
| Impeller | Stainless steel, EN 1.4301, AISI 304 |
| Material code | A |
| Code for rubber | E |
| Bearing | SIC |
| Maximum ambient temperature | 140 °F |
| Maximum operating pressure | 232.06 psi |
| Max pressure at stated temperature | 232 psi / 250 °F, 232 psi / -4 °F |
| Type of connection | Oval / NPT(F) |
| Size of suction port | 1 inch |
| Size of outlet port | 1 inch |
| Pressure rating for connection | PN 16 |
| Flange size for motor | 56C |
| Connect code | B |
| Pumped liquid | Water |
| Liquid temperature range | -4 .. 248 °F |
| Selected liquid temperature | 68 °F |
| Density | 62.29 lb/ft³ |
| Motor standard | NEMA |
| Motor type | 80CA |
| Rated power - P2 | 1.5 HP |
| Power (P2) required by pump | 1.5 HP |
| Main frequency | 60 Hz |
| Rated voltage | 3 x 208-230YY/460Y V |
| Service factor | 1.15 |
| Rated current | 4,45-4,3/2,16 A |
| Starting current | 720 % |
| Full load SF current | 5,1-4,95/2,48 A |
| Cos phi - power factor | 0.84-0.78 |
| Rated speed | 3440-3480 rpm |
| IE Efficiency class | NEMA Premium / IE3 60Hz |
| Motor efficiency at full load | 84.1-83.5 % |
| Motor efficiency at 3/4 load | 83.5-81.0 % |
| Motor efficiency at 1/2 load | 82.0 % |
| Number of poles | 2 |
| Enclosure class (IEC 34-5) | 55 Dust/Jetting |
| Insulation class (IEC 85) | F |
| Built-in motor protection | NONE |
| Frequency converter | None |
| Net weight | 54.4 lb |
| Gross weight | 65.4 lb |
| Shipping volume | 4.94 ft³ |
Estimate shipping
Refund Policy
Liberty Supply accepts returns up to 90 days after the date of invoice for domestic transactions. All returns must be issued an RMA number. RMA requests can be made by emailing support@libertysupply.com. International transactions are non-returnable and non-refundable.
No restocking fee will be imposed on items authorized for return within 30 days if they are in the original, unopened packaging and not subject to a manufacturer-imposed restocking fee. Certain products are subject to a restocking fee. This fee is determined by the specific rules set by the product's manufacturer.
Items opened and returned prior to 90 days after the date of invoice are subject to an additional 20% re-stock fee as long as they are in unaltered, saleable condition. Previously used/installed items cannot be returned unless covered by warranty.
Returns for special order items or items that have been modified (such as an impeller trim) are assessed on a case-by-case basis. If a return is allowed, special order items will incur a variable re-stock fee of up to 50%.
Customers can either ship authorized return items back to Liberty Supply or request a pick-up arranged by us. If Liberty Supply is not at fault, return shipping costs and any freight charges for replacement or original orders will be deducted from the credited amount.
All product warranties implied are the manufacturer's liability. If an item is returned under the manufacturer's warranty, Liberty Supply will forward the returned goods to the manufacturer for inspection and determination, which may take up to five (5) weeks. The final decision for warranty is solely at the manufacturer's discretion.