Description
This submersible pump is constructed from stainless steel, including EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L) materials. It is suitable for applications such as groundwater extraction, irrigation, mining, fountains, and offshore operations.
Specifications
| Manufacturer | Grundfos |
|---|---|
| Part Number | 81595225 |
| Pump speed on which pump data are based | 3450 rpm |
| Rated flow | 4.4 US gpm |
| Rated head | 429.8 ft |
| Stages | 22 |
| Number of reduced-diameter impellers | NONE |
| Shaft seal for motor | LIPSEAL |
| Approvals | CULDWUS,CCSAUS |
| Approvals for drinking water | PROP65 |
| Curve tolerance | ISO9906:2012 3B |
| Pump Number | 08010022 |
| Motor version | T40 |
| Return valve | YES |
| Specification for shaft end | SPLINE |
| Pump | Stainless steel, EN 1.4301, AISI 304 |
| Impeller | Stainless steel, EN 1.4301, AISI 304 |
| Motor | Stainless steel, DIN W.-Nr. 1.4301, AISI 304 |
| Maximum ambient pressure | 217.56 psi |
| Maximum operating pressure | 217.56 psi |
| Maximum outlet pressure | 279.92 psi |
| Type of connection | NPT(F) |
| Size of connection | 1 inch |
| Motor diameter | 4 inch |
| Minimum borehole diameter | 4.13 in |
| Pumped liquid | Water |
| Liquid temperature range | 5 .. 104 °F |
| Selected liquid temperature | 68 °F |
| Density | 62.29 lb/ft³ |
| Motor type | MS402 |
| Type of motor | RSIR |
| Motor flange design | Grundfos |
| Rated power - P2 | 1 HP |
| Power (P2) required by pump | 1 HP |
| KVA code | M |
| Main frequency | 60 Hz |
| Rated voltage | 1 x 230 V |
| Service factor | 1.40 |
| Rated current | 9.8 A |
| Starting current | 570 % |
| Cos phi - power factor | 0.82 |
| Rated speed | 3450 rpm |
| Axial load max | 772 lb |
| Start. method | direct-on-line |
| Enclosure class (IEC 34-5) | IP68 |
| Insulation class (IEC 85) | B |
| Built-in motor protection | CONTACT |
| Thermal protec | internal |
| Built-in temperature transmitter | No |
| Length of cable | 3.94 ft |
| Power cable type | ROUND SINGLE |
| Cable number | 00795B69 |
| Windings | Enamelled |
| Minimum efficiency index, MEI ≥ | 0.70 |
| Net weight | 35.3 lb |
| Gross weight | 35.9 lb |
| Shipping volume | 0.35 ft³ |
| Country of origin | US |
| Custom tariff no. | 8413.70.2004 |
Estimate shipping
Refund Policy
Liberty Supply accepts returns up to 90 days after the date of invoice for domestic transactions. All returns must be issued an RMA number. RMA requests can be made by emailing support@libertysupply.com. International transactions are non-returnable and non-refundable.
No restocking fee will be imposed on items authorized for return within 30 days if they are in the original, unopened packaging and not subject to a manufacturer-imposed restocking fee. Certain products are subject to a restocking fee. This fee is determined by the specific rules set by the product's manufacturer.
Items opened and returned prior to 90 days after the date of invoice are subject to an additional 20% re-stock fee as long as they are in unaltered, saleable condition. Previously used/installed items cannot be returned unless covered by warranty.
Returns for special order items or items that have been modified (such as an impeller trim) are assessed on a case-by-case basis. If a return is allowed, special order items will incur a variable re-stock fee of up to 50%.
Customers can either ship authorized return items back to Liberty Supply or request a pick-up arranged by us. If Liberty Supply does not receive the items for which a return is requested, the return will be denied. Additionally, if Liberty Supply is not at fault, return shipping costs and any freight charges for replacement or original orders will be deducted from the credited amount.
All product warranties implied are the manufacturer's liability. If an item is returned under the manufacturer's warranty, Liberty Supply will forward the returned goods to the manufacturer for inspection and determination, which may take up to five (5) weeks. The final decision for warranty is solely at the manufacturer's discretion.