Description
This horizontal multistage end-suction pump is engineered for inline applications and optimized for pressure boosting in industrial settings.
Specifications
| Manufacturer | Grundfos |
|---|---|
| Part Number | 97653278 |
| Rated pump speed | 3466 rpm |
| Rated flow | 30.8 US gpm |
| Rated head | 117.1 ft |
| Maximum head | 165.7 ft |
| Stages | 5 |
| Impellers | 5 |
| Number of reduced-diameter impellers | 0 |
| Low NPSH | N |
| Pump orientation | Horizontal |
| End suction pump (Yes/No) | Y |
| Shaft seal arrangement | Single |
| Code for shaft seal | HQQV |
| Approvals on nameplate | CURUS |
| Curve tolerance | ISO9906:2012 3B |
| Pump version | H |
| Cooling | TEFC |
| Base | Cast iron, EN 1561 EN-GJL-200, ASTM A48-25B |
| Impeller | Stainless steel, EN 1.4301, AISI 304 |
| Material code | A |
| Code for rubber | V |
| Bearing | SIC |
| Maximum ambient temperature | 104 °F |
| Maximum operating pressure | 232.06 psi |
| Max pressure at stated temperature | 232 psi / 194 °F, 232 psi / -4 °F |
| Size of suction port | 1 1/2 inch |
| Size of outlet port | 1 inch |
| Pressure rating for connection | PN 16 |
| Flange rating inlet | 150 lb |
| Flange size for motor | 56C |
| Connect code | GA |
| Pumped liquid | Water |
| Liquid temperature range | -4 .. 194 °F |
| Selected liquid temperature | 68 °F |
| Density | 62.29 lb/ft³ |
| Motor standard | NEMA |
| Motor type | 90GB |
| Rated power - P2 | 2 HP |
| Power (P2) required by pump | 2 HP |
| Main frequency | 60 Hz |
| Rated voltage | 3 x 208-230YY/460Y V |
| Service factor | 1.15 |
| Rated current | 6,00-5,80/2,90 A |
| Starting current | 800-910 % |
| Cos phi - power factor | 0.81-0.78 |
| Rated speed | 3500-3520 rpm |
| IE Efficiency class | NEMA Premium / IE3 60Hz |
| Motor efficiency at full load | 85.5 % |
| Motor efficiency at 3/4 load | 87.4-86.8 % |
| Motor efficiency at 1/2 load | 86.3-85.0 % |
| Number of poles | 2 |
| Enclosure class (IEC 34-5) | 55 Dust/Jetting |
| Insulation class (IEC 85) | F |
| Built-in motor protection | NONE |
| Frequency converter | None |
| Pressure sensor | N |
| Net weight | 80.3 lb |
| Gross weight | 92.6 lb |
| Shipping volume | 6.11 ft³ |
| Sales region | USA |
Documents
Estimate shipping
Refund Policy
Liberty Supply accepts returns up to 30 days after the date of invoice for domestic transactions. All returns must be issued a Return Goods Authorization (RGA) number. RGA requests can be made by emailing support@libertysupply.com. International transactions are non-returnable and non-refundable.
Items authorized for return within 30 days are subject to a minimum 10% restock fee if they are in the original, unopened packaging. Certain items are subject to a higher restock fee. The additional fee is determined by the item's manufacturer. Previously used/installed items cannot be returned unless covered by warranty.
Returns for special order items or modified items (such as an impeller trim) are assessed on a case-by-case basis. If a return is allowed, special order items will incur a restock fee of up to 50%.
Customers must ship authorized return items per the RGA instructions. A valid tracking number for the shipment must be provided via email to support@libertysupply.com. If Liberty Supply does not receive the items for which a return is requested, or items are received without an RGA, the return will be denied. If Liberty Supply is not at fault, return shipping costs will be deducted from the credited amount.
All product warranties implied are the manufacturer's liability. If an item is returned under the manufacturer's warranty, Liberty Supply will forward the returned goods to the manufacturer for inspection and determination. Inspection generally takes up to five (5) weeks for a determination to be made. The final warranty decision is solely at the manufacturer's discretion.
