This Taco FI Series base-mounted end suction pump features a 2-1/2" suction and a 2" discharge with ANSI Class 125 flanges. It is constructed with a cast iron casing and a 7-1/4" nominal diameter bronze impeller. The pump uses a stainless steel shaft with a bronze shaft sleeve and a dry shaft design that isolates the shaft from the circulating fluid. The mechanical seal consists of a ceramic seat, a carbon rotor, and EPT rubber, with a temperature rating of 250 °F. Pressure tappings are located on the suction and discharge connections, and the pump is equipped with flush seal line taps.
This unit operates at 2900 RPM and is powered by a 7-1/2 HP WEG motor. The motor is a NEMA 213 T Frame size in a TEFC configuration and requires a 380V/50Hz/3PH power supply. The motor meets MG1-12.55 premium efficiency standards. The pump assembly is mounted on a welded base that includes an integral drip pan and a Woods coupler protected by a standard coupler guard.