This Taco CI Series close coupled end suction pump features a cast iron casing with ANSI Class 125 flanges and a bronze wear ring. It is equipped with a 2-1/2" suction connection, a 2" discharge connection, and a 9-1/2" nominal diameter bronze impeller. The pump uses a bronze shaft sleeve and a mechanical seal constructed with a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250 °F. The unit includes a dry shaft design, flush seal line taps for filter installation, and pressure tappings on the suction and discharge connections. The rear pullout design allows for servicing without disturbing system piping, and the top center line discharge configuration supports pump venting.
The pump is powered by a 5 HP Baldor TEFC motor that operates at 1750 RPM. It features a JM frame style with feet and is configured for a 230/460/60/3PH power supply with an across the line starting option. The motor is NEMA standard and meets MG1-12.55 premium efficiency requirements with AEGIS shaft grounding. The assembly is rated for a 40 °C ambient temperature and CCW rotation. This pump has a PEI of 0.84.