This Taco CI Series close-coupled end suction pump features a 2" suction port and a 1-1/4" discharge port. The pump uses a 7-1/4" nominal diameter bronze impeller housed within a cast iron casing. It utilizes a bronze shaft sleeve and a dry shaft design to prevent system fluid from contacting the shaft. The mechanical seal consists of a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250°F. The unit features a rear pullout design, flush seal line taps, and a top center line discharge configuration. It is equipped with ANSI Class 125 flanges and does not include a wear ring.
The pump operates at 3450 RPM and is powered by a 5 HP WEG motor. The motor is enclosed in a TEFC housing and configured with a 184 JM frame with feet. It operates on a 230-460V, 3PH, 60Hz power supply with an across-the-line starting option. The assembly includes AEGIS shaft grounding and meets NEMA MG1-12.55 premium efficiency standards with a DOE PEI value of 0.83. The motor supports a 40°C ambient temperature and is set for counter-clockwise rotation.