This Taco CI Series close coupled end suction pump features a cast iron casing with ANSI Class 125 flanges and a 9-1/2" nominal diameter bronze impeller. It includes a 2-1/2" suction connection and a 2" discharge connection. The unit utilizes a rear pullout design, a top center line discharge, and a dry shaft configuration with a stainless steel shaft sleeve. The mechanical seal consists of a silicon-carbide seat, carbon rotor, and EPT rubber. The pump is rated for clean water applications with a maximum temperature of 250°F. Flush seal line taps are included to allow for the installation of a filter, and pressure tappings are provided on the suction and discharge connections.
The pump is powered by a 5 HP Baldor motor with a TEFC enclosure and operates at 1750 RPM. It is configured for a 230-460V, 60Hz, 3PH power supply. The motor utilizes a 184JM frame style with feet and meets MG1-12.55 premium efficiency standards. This unit includes AEGIS shaft grounding and is rated for a 40°C ambient temperature. The pump assembly has a PEI value of 0.84.