This Taco CI Series close-coupled end suction pump features a 5" suction and a 4" discharge with ANSI Class 125 flanges. It utilizes a 7-1/4" nominal diameter bronze impeller and a cast iron casing. The internal construction includes a bronze shaft sleeve and a dry shaft design that prevents system fluid contact with the pump shaft. The mechanical seal consists of a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250 °F. Flush seal line taps are included to allow for the installation of a filter to protect the seal. The unit features a rear pullout design and a top center line discharge.
This pump operates at 1750 RPM and is powered by a 5 HP WEG motor. The electrical configuration is 230-460V, 60 Hz, 3 PH, with a TEFC enclosure and a drip cover. The motor is housed in a 184JM frame with feet and features AEGIS shaft grounding. The unit meets NEMA premium efficiency standards per MG1-12.55 and has a DOE PEI rating of 0.91. The pump is rated for a 104 °F ambient environment and uses an across-the-line starting option.