This Taco CI Series close-coupled end suction pump features a 6" suction connection and a 5" discharge connection with ANSI Class 125 flanges. The pump is constructed with a cast iron casing, a 7-1/4" nominal diameter bronze impeller, and a bronze shaft sleeve. The dry shaft design prevents contact between the pump shaft and the circulating fluid. The mechanical seal is configured with a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250 °F. A rear pullout design allows for servicing without removing system piping, and the unit includes flush seal line taps and pressure tappings on suction and discharge connections.
This pump operates at 1750 RPM and is powered by a 7-1/2 HP WEG motor. It is configured with a TEFC enclosure, AEGIS shaft grounding, and a 213 JM motor frame with feet. The unit operates on a 230-460V/60Hz/3PH power supply with an across-the-line starting option. The motor is NEMA standard and rated for 40 °C ambient conditions. The pump meets MG1-12.55 efficiency standards and has a DOE PEI rating of 0.96.