This Taco CI Series close-coupled end suction pump features a 2-1/2" suction connection and a 2" discharge connection with ANSI Class 125 flanges. It utilizes a 7-1/4" diameter bronze impeller housed within a cast iron casing. The assembly incorporates a bronze shaft sleeve and a dry shaft design that prevents system fluid from contacting the pump shaft. A mechanical seal consisting of a ceramic seat, carbon rotor, and EPT rubber seals the unit for operation at temperatures up to 250°F. The pump includes pressure tappings on the suction and discharge connections, flush seal line taps, and a rear pullout design that allows for servicing without removing system piping.
The pump operates at 1750 RPM and is powered by a 3 HP WEG motor with a TEFC enclosure and a drip cover. The motor uses a 182 JM frame with feet and is configured for 230-460/60/3 PH power. This motor meets NEMA Premium Efficiency standards per MG1-12.55 and includes AEGIS shaft grounding. The pump has a DOE PEI rating of 0.86 and supports across-the-line starting. It is configured for a 40°C ambient operating environment.