This Taco CI Series close-coupled end suction pump features a 2-1/2" suction connection and a 2" discharge connection with ANSI Class 125 flanges. The pump includes a 7-1/4" nominal diameter bronze impeller and a cast iron casing. It is equipped with a bronze wear ring and a slip-on bronze shaft sleeve. The dry shaft design isolates the shaft from the circulating fluid. The mechanical seal consists of a ceramic seat, carbon rotor, and EPT rubber, rated for operation up to 250°F. The unit includes a rear pullout design, top center line discharge, and flush seal line taps. Pressure tappings are located on the suction and discharge connections.
This pump is configured with a 3 HP Baldor motor with a Super E premium efficiency rating and a TEFC enclosure. It operates at 1750 RPM on a 230-460V/60Hz/3PH power supply using an across-the-line starting option. The motor is mounted on a 182JM frame with feet and is rated for a 40°C ambient temperature. The motor meets NEMA standards and operates in a counter-clockwise direction. The unit has a DOE PEI of 0.86.