This Taco CI Series close-coupled end suction pump features a cast iron casing with 6" suction and 5" discharge ANSI Class 125 flanges. It utilizes a 9-1/2" nominal diameter bronze impeller and a bronze shaft sleeve. The design incorporates a dry shaft construction and a slip-on shaft sleeve to facilitate maintenance. The mechanical seal consists of a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250°F. The pump includes flush seal line taps and pressure tappings on the suction and discharge connections. The rear pullout design allows for service without disturbing the system piping, and the top centerline discharge configuration provides self-venting capabilities.
This unit is configured with a 5 HP WEG TEFC motor in a 215 JM frame with feet. The motor operates at 1150 RPM and 230-460V/60Hz/3PH using across-the-line starting. The motor meets NEMA Premium Efficiency standards per MG1-12.55 and includes AEGIS shaft grounding. The pump is rated for a 40°C ambient temperature with counter-clockwise rotation.