This Taco CI Series close coupled end suction pump features a 2-1/2" suction and a 2" discharge with ANSI Class 125 flanges. It utilizes a 7-1/4" nominal diameter bronze impeller and a cast iron casing. The construction includes a bronze shaft sleeve and a dry shaft design to prevent fluid contact with the shaft. It incorporates a mechanical seal with a ceramic seat, carbon rotor, and EPT rubber components. The pump features flush seal line taps and pressure tappings on the suction and discharge connections. The rear pullout design allows for servicing without disturbing the system piping, and the top center line discharge configuration assists with venting and piping alignment.
The pump operates at 3450 RPM and is powered by a 15 HP WEG TEFC motor with a drip cover. It utilizes a NEMA 254 JM motor frame style with feet. The unit operates on a 230-460V, 60Hz, 3PH power supply and includes AEGIS shaft grounding. The motor meets NEMA Premium Efficiency standards per MG1-12.55, and the pump maintains a DOE PEI rating of 0.9. It is configured for a 40°C ambient environment and utilizes an across the line starting option.