This Taco FI Series base-mounted end suction pump features a 6" suction and a 5" discharge with ANSI Class 125 flanges. The pump is constructed with a cast iron casing and a 7-1/4" nominal diameter bronze impeller. It utilizes a stainless steel shaft with a replaceable bronze shaft sleeve and a dry shaft design that prevents fluid contact with the shaft. The unit is configured with a mechanical seal containing a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250°F. The casing includes pressure tappings on the suction and discharge connections to facilitate system monitoring.
This pump operates at 3450 RPM and is powered by a 75 HP Baldor motor with an ODP enclosure. The electrical configuration supports 230-460V, 60Hz, 3PH power with across the line starting. The motor meets NEMA premium efficiency standards per MG1-12.55 and includes AEGIS shaft grounding for protection. This pump end only assembly has a DOE PEI rating of 0.96 and is rated for operation in 40°C ambient temperatures.