This Taco FI Series base-mounted end suction pump features a 2-1/2" suction and a 2" discharge. The pump is constructed with a cast iron casing, a bronze impeller with a 7-1/4" nominal diameter, and a bronze wear ring. The unit utilizes a stainless steel shaft equipped with a replaceable bronze shaft sleeve and a dry shaft design to prevent fluid contact with the shaft. The mechanical seal consists of a ceramic seat, carbon rotor, and EPT rubber, rated for operation up to 250°F. The casing includes suction and discharge pressure tappings for system monitoring.
This pump operates at 1750 RPM and is powered by a 2 HP Baldor TEFC motor housed in a NEMA 145 T frame. The motor is configured for 230-460V, 60Hz, 3PH power and utilizes across-the-line starting. The assembly is mounted on a welded base that includes a drip pan and an OSHA-compliant coupler guard for the included Woods coupler. The system features AEGIS shaft grounding and meets MG1-12.55 premium efficiency standards with a PEI rating of 0.88. The equipment is rated for a 40°C ambient environment.