This Taco CI Series close-coupled end suction pump features a cast iron casing and cover with a stainless steel impeller and a 7-1/4" nominal impeller diameter. The unit includes a 5" suction and a 4" discharge with ANSI Class 125 flanges and a bronze wear ring. It utilizes a dry shaft design with a replaceable, slip-on bronze shaft sleeve. The mechanical seal assembly consists of a ceramic seat, carbon rotor, and EPT rubber, rated for fluid temperatures up to 250 °F. The pump is configured with flush seal line taps and pressure tappings on the suction and discharge connections. The rear pullout design allows for maintenance without disturbing system piping, and the top centerline discharge configuration provides self-venting capabilities.
This pump is powered by a 5 HP Baldor motor with a TEFC enclosure and a 184 JM frame with mounting feet. It operates at 1750 RPM using 230-460/60/3 PH power and features across the line starting. The motor meets MG1-12.55 premium efficiency standards and includes AEGIS shaft grounding. The assembly is rated for a 40 °C ambient temperature and is configured for counter-clockwise rotation. This product carries a PEI of 0.91.