This Taco CI Series close-coupled end suction pump features a 6" suction and a 5" discharge with ANSI Class 250 flanges. The unit utilizes a 7-1/4" nominal impeller diameter, a cast iron casing, and a bronze impeller. It incorporates a bronze shaft sleeve and a mechanical seal composed of a ceramic seat, carbon rotor, and EPT rubber. The pump design includes a dry shaft to protect the internal components, flush seal line taps for particle filtration, and pressure tappings on both the suction and discharge connections. The rear pullout configuration allows for servicing without disconnecting the system piping.
The pump is configured with a Baldor 7-1/2 HP motor operating at 1750 RPM. It features a TEFC enclosure and a 213 JM motor frame with mounting feet. The motor is rated for 230-460V/60/3PH power and uses across the line starting. This configuration includes AEGIS shaft grounding and meets premium efficiency standards per MG1-12.55. The pump operates at a 40°C ambient temperature with a 250°F maximum fluid temperature rating and maintains a PEI of 0.96.