This Taco CI Series close-coupled end suction pump features a 5" suction and a 4" discharge with ANSI Class 125 flanges. The pump is constructed with a cast iron casing and a 7-1/4" nominal diameter bronze impeller. It incorporates a dry shaft design with a slip-on bronze shaft sleeve and a mechanical seal consisting of a ceramic seat, carbon rotor, and EPT rubber. The unit is rated for fluid temperatures up to 250 °F and includes flush seal line taps and pressure tappings on the suction and discharge connections. The rear pullout design allows for internal servicing without disturbing system piping, while the top center line discharge configuration facilitates self-venting.
The pump is configured with a 5 HP Baldor motor in a 184 JM frame style with feet and a TEFC enclosure. It operates at 1750 RPM on a 200V, 60Hz, 3PH power supply using across the line starting. The motor meets NEMA premium efficiency standards per MG1-12.55 and includes an AEGIS shaft grounding ring. This assembly is rated for a 40 °C ambient temperature and has a PEI value of 0.91.