This Taco CI Series close-coupled end suction pump features a cast iron casing and a stainless steel NSF61 impeller with a 7-1/4" nominal diameter. It is equipped with ANSI Class 125 flanges and a bronze wear ring. The pump uses a dry shaft design and a bronze shaft sleeve to isolate the shaft from the circulating fluid. The mechanical seal is constructed with a ceramic seat, carbon rotor, and EPT rubber. The suction connection measures 2-1/2" and the discharge connection measures 1-1/2". The rear pullout design allows for maintenance without disturbing system piping, and flush seal line taps are provided for the installation of an optional filter.
The pump operates at 3450 RPM and is powered by a 15 HP Baldor motor. The motor includes an ODP enclosure, a drip cover, and a 215 JM frame with feet. It is configured for a 230-460V/60/3PH power supply with across-the-line starting. The motor meets NEMA standards and MG1-12.55 premium efficiency requirements and features AEGIS shaft grounding. The unit has a PEI value of 0.87.