This Taco FI Series base-mounted end suction pump features a 2-1/2" suction connection and a 2" discharge connection with ANSI Class 250 flanges. The pump is constructed with a cast iron casing, a 7-1/4" nominal diameter bronze impeller, a bronze shaft sleeve, and a stainless steel shaft. It incorporates a bronze wear ring and a dry shaft design. The mechanical seal consists of a ceramic seat, a carbon rotor, and EPT rubber, rated for operation up to 250°F. Pressure tappings are provided on both the suction and discharge connections.
This unit operates at 1750 RPM and is powered by a 3 HP Baldor TEFC motor, configured for 200V/60Hz/3PH power supply in a NEMA 182 T-frame. The pump uses an across the line starting method and includes AEGIS shaft grounding. It is mounted on a welded base that features an integrated drip pan and a Woods coupler. The pump meets NEMA Premium Efficiency MG1-12.55 standards with a PEI of 0.88 and is rated for a 40°C ambient temperature.