This Taco CI Series close-coupled end suction pump features a 6" suction and 5" discharge with ANSI Class 125 flanges. It utilizes a 7-1/4" nominal diameter bronze impeller housed within a cast iron casing. The pump includes a bronze shaft sleeve and a dry shaft design to prevent fluid contact with the shaft. It is configured with a mechanical seal using a ceramic seat, carbon rotor, and EPT rubber, rated for temperatures up to 250 °F. The unit features flush seal line taps and pressure tappings on the suction and discharge connections.
This unit operates at 1750 RPM and is powered by a 7-1/2 HP Baldor Super E premium efficiency motor. The motor uses a TEFC enclosure, JM frame style with feet, and complies with NEMA MG1-12.55 standards. Electrical configuration is 230-460V, 3PH, 60 Hz with across-the-line starting. The pump is rated for 40 °C ambient temperature and features a DOE PEI of 0.91. The design incorporates a rear pullout feature for maintenance access, and the top center line discharge configuration assists in system venting.