This Taco FI Series base-mounted end suction pump features a 2-1/2" suction and a 2" discharge with ANSI Class 125 flanges. The pump construction includes a cast iron casing, a 7-1/4" nominal diameter bronze impeller, and a stainless steel shaft with a stainless steel shaft sleeve. It utilizes a bronze wear ring. The mechanical seal consists of a ceramic seat, a carbon rotor, and Buna rubber, providing a temperature rating of 225 °F. The unit incorporates a dry shaft design and includes flush seal line taps.
The system operates at 1750 RPM and is powered by a 3 HP Baldor TEFC motor in a NEMA 182T frame. The electrical configuration is 230-460/60/3PH with premium efficiency that meets MG1-12.55 standards and includes AEGIS shaft grounding. The pump assembly is mounted on a welded base that features an integrated drip pan and an OSHA-compliant coupler guard. The connection between the motor and pump utilizes a Woods standard coupler. This pump has a PEI value of 0.88 and is rated for a 40 °C ambient environment.