This Taco FI Series base-mounted end suction pump features a cast iron casing with ANSI Class 125 flanges, a 2-1/2" suction, and a 2" discharge. The unit utilizes a 7-1/4" nominal diameter bronze impeller and a stainless steel shaft equipped with a replaceable bronze shaft sleeve. It incorporates a dry shaft design to prevent contact between the circulating fluid and the shaft. The mechanical seal includes a ceramic seat, carbon rotor, and EPT rubber, and is rated for operation at temperatures up to 250°F. The pump casing includes integrally cast mounting feet and ports for gauge connections.
This pump operates at 1750 RPM and is powered by a 2 HP Weg TEFC Super E Premium Efficiency motor. It is built on a 145 NEMA T-frame with a 40°C ambient rating. The electrical configuration is 380/60/3 with across-the-line starting. The pump assembly is mounted on a welded base that includes an integral drip pan and is configured with a standard coupler guard and a Woods coupler. The pump meets MG1-12.55 efficiency standards and has a PEI of 0.88.